Monday, April 4, 2011

Carton Wallet (


  • Half gallon milk or juice carton with plastic cap, rinsed
  • Scissors
  • Paper towels
  • Tape
  • Wallet Template
  • Ballpoint pen
  • Ruler
  • Craft knife (optional)
  • Butter knife

  1. Carton Wallet - Step 1 Cut open the carton so it lies flat, as shown; put aside the cap for now. Dry the inside with the paper towels. Tape thetemplate on top of the carton so that the top circle lines up with the spout. Mark the outline of the template with a ballpoint pen. Using firm pressure, trace the lower circle and the dotted lines of the template so that they transfer to the carton. (This will score the lines for easier folding.) A ruler will help you mark the straight lines. Cut out the shape from the carton.
  2. Carton Wallet - Step 2 Use scissors to cut out the lower circle as marked. (Tip: To make cutting out the circle easier, first make an X with a craft knife.) Use a ruler and a butter knife to further score the fold lines. 
  3. Following the fold lines you marked, create an accordion fold on each side of the wallet.
  4. Tightly squeeze the accordion folds. Fold the top flap down, pushing the spout through the hole. Screw on the cap to keep the flap in place.         
Carton Wallet - Step 3

Robots (

Can-Do Robots

  • Tin can
  • Electrical tape (optional)
  • Hardware, and various recyclables such as bottle caps, keys, etc.
  • Hot-glue gun
  • Strong disk magnets
  1. Open a tin can with a safety can opener so there are no sharp edges. (If you only have a regular opener, line the inside of the can's rim with electrical tape.)
  2. Empty, wash, and dry the can.
  3. For facial features, arms, propulsion devices, and communication arrays, look for items around the house and at the hardware store. We used bolts, brackets, hinges, keys, wing nuts, switches, bottle caps, washers, knobs, and more.
  4. Hot-glue the items to strong disk magnets. 

Pop-up Eggs (

Pop-up Eggs

  • Card stock
  • Scissors
  • Double-sided tape
  • Embroidery floss
  1. Begin by cutting out three identical egg shapes from card stock (ours are 8 inches tall). Crease the eggs by folding them in half lengthwise and opening them back up.
  2. Cut card stock into strips of varying sizes from 3/4- to 1 1/4-inch wide and 9 to 12 inches long. Accordion-fold the strips so that there's about one inch between each fold.
  3. Pop-up Easter Egg Step 3  Attach the ends of several strips along one edge of an egg using double-sided tape. Trim the strips so that they make a shallow arc across the egg's width, then secure the other ends in place.
  4. When you've covered all three eggs, use double-sided tape to join their backs as shown. Between two of the sections, insert a loop of embroidery floss for hanging. Tip: If the strips sag when you hang the egg, peel them off, shorten them, and reposition them.

Bottle Cap Tambourine (

For the tambourine , use a hammer to flatten twenty metal bottle caps from old-fashioned sodas (all-metal ones without plastic liners work best). For the fullest sound, make some of them flatter than others.
An adult should hammer a nail hole in the middle of each cap. Glue two stiff paper plates together with their bottoms facing; let dry. Punch six pairs of holes around the rims of the plates. Through five pairs of holes, thread four inches of waxed twine or yarn, positioning pairs and trios of bottle caps between and outside the plates to make little stacks of jingles, and tie. Tie ribbon streamers through the last hole.

Read more at Making Music - Martha Stewart Crafts 

Paper Tops (

Paper Tops

Paint toothpicks with paint pens if you like; let dry. Glue one end of a 24-inch-long strip of paper just above the toothpick's tip. Roll tightly, and secure the end with glue. Glue on another strip and continue rolling; repeat about six times to make a disc 1 1/4 inches across. To decorate, glue on thinner strips in other colors. Press the coiled paper between thumb and fingers to shape the top.

Read more at Paper Tops - Martha Stewart Kids 

Shell Flowerpots (

Shell Flowerpots

Kids will love making these beachy terra-cotta plant pots using snail shells, Atlantic cockles, quahogs, or black calico scallops.

Use craft glue or hot glue to attach shells of uniform size. Start with a ring of shells at the top (shells should extend above the rim of the pot) and work downward, placing each successive row about halfway down the shells on the previous ring.

Read more at Favorite Kids' Crafts 

Mosaic Beans

Magical Beans Mosaic

Tools and MaterialsPencil
Canvas boards
Small paintbrush
Craft glue
Dried beans

Magical Beans Mosaic How-To1. Start by drawing a pattern in pencil on your canvas board. You can create geometric designs, a still life, or even a portrait in dried beans -- think of it as a color-by-numbers painting.

2. "Paint" a thin layer of glue in one area of your pattern, and sprinkle the area with colorful beans. Use a single color in each area.

3. Use the ruler to tidy up the edges of the beans before moving on to the next area.

4. Repeat steps 1 through 3 until the board is covered. Let dry for 1 hour.

ResourcesThis project is from Rosie O'Donnel's new book, "Crafty U," 

Read more at Magical Beans Mosaic - Martha Stewart Crafts 

Shell Wind Chimes (

Shell Wind Chimes

Kids can carry pieces of the beach with them into the winter with this seashell wind chime.

Starting with two sticks 6 and 3 inches long and cotton string of varying lengths, tie one end of a string piece around a shell or piece of sea glass and the other end to one of the sticks. Use same-size pieces of string to connect the two sticks, and tie a 24-inch string to the top stick for hanging.

Read more at Favorite Kids' Crafts 

Nature Walk Bracelet (

Bracelet How-ToCut a piece of wide masking or colorful electrical tape to fit around the wrist, plus 1/2 inch more. Wrap tape around child's wrist, tacky side up, overlapping ends to secure. Press collected items onto tape. Later, with sticky side up, fold both ends under a few times. Lay plastic wrap over sticky part of bracelet, and trim excess. With a small hole punch or needle, make a hole through ends; tie a 5-inch piece of string through each hole.

Read more at Nature Walk Bracelet - Martha Stewart Kids 

Tissue Paper Butterfly (

What you'll need:
  • Tissue paper, various colors
  • Black pipe cleaners
  • Scissors
How to make your Tissue Paper Butterfly:
  • Cut the corners off the tissue paper squares (as shown in the photo at right).
  • Gently bunch the tissue paper in the middle and wrap the pipe cleaner around the middle.
  • Twist the pipe cleaner together to secure it.
tissue paper butterflies
butterfly craft step 1
butterfly craft for kids

Baby Birds in Nest ( )

baby birds craft
birds in nest craft - step 1
baby birds craft - step 2

What you'll need:
  • Construction paper, various colors
  • Baby Birds Template
  • Googly eyes
  • Large paper plate
  • Brown tissue paper
  • Glue
  • Scissors
How to make your Baby Birds Craft:
  • Cut a paper plate in half. Glue one half of the plate (just around the edges) onto a piece of construction paper as shown at right to create a pocket. Set aside to let dry.
  • Print out our baby birds template. Use it to cut out 3 birds of any color construction paper you would like.
  • Cut out the wings and feathers and glue onto each bird. Cut small orange triangles for beaks and glue onto the birds.
  • Glue two googly eyes onto each bird above the beak. Set your finished bird aside to dry.
  • Cover the paper plate in glue. Cut strips of brown tissue paper that are approximately an inch wide and crumple them up. Stick the tissue paper to the paper plate so that it is completely covered.
  • Glue your baby birds into the nest.

Bottle Cap Caterpillar (

caterpillar craft

What you'll need:
  • Bottle caps (we used 6)
  • Green construction paper
  • Scissors
  • White glue
  • Crayons
  • Pipe cleaners
  • Googly eyes
How to make your Bottle Cap Caterpillar Craft:
  1. Cut a leaf shape out of the construction paper.
  2. Have your child color the bottle caps any colors they want. Our daughter is on a rainbow kick and went with a different color for each cap.
  3. Pour a puddle of glue on a scrap piece of paper and have your child dip each cap into the glue puddle and then stick the caps onto the leaf in a line.
  4. Add little googly eyes and a pipe cleaner smile to the first bottle cap. Cut small pieces of pipe cleaner to use as antennae and glue them to the first cap as well.
  5. Use a crayon to draw legs on the remaining caps.

Spring Tree (

FinalBlossomTree  Tuesday, April 6 from 10:00 to 12:00 in the Children’s Room.
Bring the entire family to the library for Spring Crafts!  We will have crafts for kids of all ages so drop in and celebrate Spring with us!
While you’re here be sure to check out our display of Easter, Passover and Spring Books for kids.

Wednesday, April 7 from 1:00-3:00 in the Teen Space is for Teens Only!
Back by popular demand we will be doing more Recycled Crafts.  Come ready to express your creativity!

Just a reminder, we will not be holding any of our regularly scheduled preschool programs during the week of April 5-9.  We will be back to our usual schedule the following week.